Dedicated tool that safely compresses coil springs for suspension work without fighting factory tension. Engineered for controlled compression and release. Built for repeated use on different spring rates.
Will this work on my lowering springs or just stock springs?
Spring compressors are rated for a range of spring rates. Verify your spring's rate (usually marked on the coil) falls within the tool's capacity before clamping — stiffer aftermarket springs sometimes need higher compression force than stock.
Do I need a jack or press to use this?
You'll still need to support the vehicle on jack stands and remove the wheel and strut assembly. The compressor itself handles the spring tension once the assembly is on the bench — no hydraulic press required.
What do I do if the compressor won't fully close on my spring?
Loosen the adjustment points and reposition the clamps closer to the coil's center. If the spring diameter is significantly outside typical range, test-fit the tool before fully committing to a job — oversized or undersized springs may not seat properly.
Products are direct shipped from Supplier.
* Rates from 0–36% APR. Payment options through Affirm are subject to an eligibility check and are provided by these lending partners: affirm.com/lenders. Options depend on your purchase amount, and a down payment may be required. CA residents: Loans by Affirm Loan Services, LLC are made or arranged pursuant to a California Finance Lenders Law license. For licenses and disclosures, see affirm.com/licenses. For example, a $800 purchase could be split into 12 monthly payments of $72.21 at 15% APR or 4 interest free payments of $200 every 2 weeks.
**Rates from 0%-36% APR. Payment options through Shop Pay Installments, are subject to an eligibility check and are provided by these lending partners: affirm.com/lenders. Options depend on your purchase amount, and a down payment may be required. State notices to consumers https://www.affirm.com/licenses.
