Silicone Hose 3-Ply 2.00" to 2.50" Reducer 90 Degree Black/Red
- Direct Shipped
Silicone Hose 3-Ply 2.00" to 2.50" Reducer 90 Degree Black/Red
A stepped silicone coupler that bridges two different hose diameters at a 90-degree angle. Built with 3-ply reinforced construction for durability under pressure and temperature cycling. Black exterior with red inner wall—works as a radiator bypass, intake manifold riser, or custom coolant line solution.
Key Features
- 90-degree angle configuration - Fits tight engine bay layouts where straight hose routing isn't an option
- 3-ply silicone with reinforcement - Handles repeated pressure cycles and wide temperature swings without cracking
- Stepped diameter reducer - Transitions smoothly from 2.00" inlet to 2.50" outlet without additional adapters
Specs
- Material: Silicone, 3-ply reinforced
- Configuration: 90-degree elbow with stepped reducer (2.00" to 2.50")
- Color: Black exterior, red interior
- Quantity: Single coupler
Whats Included
- Silicone hose coupler only
Frequently Asked Questions
Do I need hose clamps for this coupler?
Yes. This coupler doesn't include clamps—you'll need to supply stainless steel worm gear or band clamps sized for 2.00" and 2.50" hose barbs. Most builders run dual clamps per end for reliability.
Can I use this with coolant, or is it just for intake tube work?
3-ply silicone handles both coolant and intake applications within normal operating temps. Verify your coolant type doesn't react with silicone if you're running anything exotic—standard glycol and water-based coolants are fine.
What if my hose barbs don't match the 2.00" and 2.50" sizing exactly?
Test-fit both connections before you commit to clamps. If your original hose is 1.875" or 2.25", you may need different reducer sizes. This coupler is engineered for those two specific diameters.
Products are direct shipped from Supplier.