3/8 Inch NBR Fuel Line Hose - 25 Foot Roll
- Direct Shipped
3/8 Inch NBR Fuel Line Hose — 25 Foot Roll
NBR rubber fuel line rated for automotive fuel systems, sold as a continuous 25-foot roll. This is pure fuel-grade hose—no fittings, no adapters, just the line itself ready to cut and install. NBR construction handles gasoline and ethanol blends without degradation.
Key Features
- 3/8 inch inner diameter — matches common fuel line sizing for street and engine swap applications
- Continuous roll format — measure and cut exactly what you need; no waste from pre-cut segments
- Fuel-grade NBR — resists gasoline, ethanol blends, and temperature swings without cracking or weeping
Specs
- Material: NBR Rubber
- Diameter: 3/8 Inch
- Length: 25 Feet (continuous roll)
- Condition: New
What's Included
- 25-foot roll of 3/8 inch NBR fuel line hose
Frequently Asked Questions
Do I need fittings and clamps to install this?
Yes. This is bare hose only — you'll need to source 3/8 inch fuel line fittings (barbed or compression style) and hose clamps separately based on your fuel system design. Determine your fitting type before ordering.
Can I use this for fuel injection systems on a modern engine swap?
NBR fuel line works for most street fuel injection setups, but high-pressure direct-injection systems may require reinforced or braided fuel line. Check your fuel pump pressure rating and injector specs first — if you're running over 60 PSI, step up to a rated fuel rail hose instead.
Should I prep or clean the hose before running it?
Rinse the interior with fresh gasoline or fuel system cleaner to remove any factory residue or debris before connecting to your fuel system. Don't use compressed air — it can introduce moisture. Let it drain dry before final installation.
Products are direct shipped from Supplier.