3.00" to 3.50" 90 Degree Silicone Reducer Hose - 3-Ply Black
- Direct Shipped
3.00" to 3.50" 90 Degree Silicone Reducer Hose — 3-Ply Black
Stepped silicone hose transitions coolant or intake flow from 3-inch to 3.5-inch diameter with a 90-degree bend. Three-ply construction handles boost and coolant pressure without ballooning or collapsing. Black exterior resists UV and oil degradation in engine bay conditions.
Key Features
- Step-down taper — Matches different diameter piping without adapters or custom fabrication
- 90-degree elbow — Routes flow around tight corners without kinking or dead zones
- 3-ply reinforcement — Resists collapse under vacuum and holds shape under pressure cycles
Specs
- Material: Silicone
- Configuration: 90-degree elbow reducer
- Inlet: 3.00 inch diameter
- Outlet: 3.50 inch diameter
- Construction: 3-ply reinforced
- Color: Black
What's Included
- One 3.00" to 3.50" 90-degree silicone reducer hose
Frequently Asked Questions
Will this hose work for both coolant and boost applications?
Yes. Silicone construction tolerates coolant loops and turbo/supercharger intake charge air without degradation. If you're running boost, confirm your system pressure stays within silicone's safe operating range for your specific setup.
Do I need hose clamps?
You'll need clamps rated for the hose diameters you're connecting to — typically 3-inch and 3.5-inch band clamps. Clamps are not included, so source them separately based on your plumbing layout.
Can I cut or modify this hose to fit a tighter space?
Cutting silicone hose is straightforward, but you lose the 90-degree geometry and bend radius engineering. If your space requires a different angle or length, custom hose from a local fabricator often costs less than trial-and-error modifications.
Products are direct shipped from Supplier.