3.00" Silicone Hose 3-PLY Straight 1 Meter Black
- Direct Shipped
3.00" Silicone Hose 3-PLY Straight 1 Meter Black
High-temp silicone radiator hose rated for serious coolant flow, built with three reinforcement plies for durability under pressure. Black silicone construction handles hot and cold cycles without cracking or weeping. Straight configuration fits direct replacements and custom cooling setups.
Key Features
- 3-PLY Reinforced Weave - Resists bursting and maintains structural integrity under sustained pressure.
- High-Temp Silicone - Engineered to handle coolant extremes without degradation or leaks.
- Straight Configuration - Direct replacement path for stock cooling routes or custom plumbing layouts.
Specs
- Diameter: 3.00"
- Length: 1 Meter (straight)
- Material: Silicone
- Plies: 3
- Condition: New
Whats Included
- 1x 3.00" Silicone Hose (1 Meter straight section)
Frequently Asked Questions
Do I need hose clamps to install this?
Yes. This hose ships without clamps — you'll need separate hose clamps or bands sized for 3.00" diameter to secure both ends. Spring clamps or worm-gear clamps work fine depending on your setup.
Can I cut this to a shorter length?
Absolutely. A utility knife or hose cutter will slice through silicone cleanly. Just seal the cut ends with a sharp, straight cut to avoid fraying and ensure clean clamp seating.
Will this work with my current cooling system without modification?
If your factory hose is 3.00" diameter straight, this is a drop-in swap. If you're running a different diameter or need bends, you'll need to source the correct size or configuration — straight hose won't flex into curves.
Products are direct shipped from Supplier.