2012-2014 Acura TSX 2.4L AT OEM Radiator
2012-2014 Acura TSX 2.4L AT OEM Radiator
2012-2014 Acura TSX 2.4L AT OEM Radiator
2012-2014 Acura TSX 2.4L AT OEM Radiator
2012-2014 Acura TSX 2.4L AT OEM Radiator
2012-2014 Acura TSX 2.4L AT OEM Radiator

2012-2014 Acura TSX 2.4L AT OEM Radiator

Regular price $180.00 Sale price$149.99 Save $30.01
/

  • Direct Shipped
2012–2014 Acura TSX 2.4L AT OEM Radiator

Factory replacement radiator for 2.4L automatic transmission models. OEM-spec aluminum construction built to manage coolant flow and engine temperatures under stock and slightly modified conditions. Direct bolt-in design maintains original cooling efficiency without modification to mounting points or hose routing.

✓ Factory Mounting Points ✓ Direct-from-Warehouse ✓ In-House Quality Check
Key Features
  • OEM Core Design - Identical cooling capacity and fin density to original equipment, no guessing on performance.
  • Full Tank Compatibility - Works with factory inlet/outlet placement and existing hose clamps—no adapter fittings required.
  • Sealed Unit - Ships complete and ready to install without pre-assembly or pressure testing.
Specs
  • Material: Aluminum
  • Configuration: OEM single-pass core
  • Condition: New
Whats Included
  • Radiator assembly
Frequently Asked Questions

Do I need new coolant hoses when I install this?

Inspect your existing hoses before installation. If clamps still grip tight and hose material shows no cracking or deterioration, reuse them. If hoses are brittle or leaking, replace before installation—old rubber can fail shortly after a new radiator goes in.

What coolant type should I fill this with?

Use the same coolant your vehicle originally came with—refer to your owner's manual for type and mix ratio. Do not mix coolant types. Flush the system completely before filling to avoid contamination from old fluid.

Can I test this radiator before final installation?

Yes. Once mounted, fill the system halfway, run the engine for 2–3 minutes at idle, and check for leaks at all connection points and the tank. If no leaks appear, drain and refill completely. This confirms the unit holds pressure before you button everything up.

Products are direct shipped from Supplier.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


Recently viewed