2.75" to 3.00" 45 Degree Silicone Reducer Hose - Red
- Direct Shipped
2.75" to 3.00" 45 Degree Silicone Reducer Hose — Red
Stepped silicone hose that tapers from 2.75" down to 3.00" at a 45-degree angle. Built from reinforced silicone construction for durability under boost and temperature cycles. The angled transition makes it ideal for custom intake and cooling system routing where space or angle constraints demand a smooth step-down.
Key Features
- Angled Transition - 45-degree geometry lets you route hose at an angle without kinking or collapsing.
- Dual-Diameter Design - Larger 3.00" opening on one end steps down to 2.75" on the other, making it a direct bridge between mismatched diameter components.
- Temperature Stable - Silicone construction handles coolant and intake charge air without degradation.
Specs
- Material: Silicone with reinforcement
- Configuration: 45-degree reducer hose, 2.75" to 3.00"
- Quantity: Single hose
Whats Included
- 1x Silicone reducer hose
Frequently Asked Questions
Will this hose work for both coolant and boost applications?
Silicone handles both coolant loops and intercooler piping without issue. Temperature range and pressure rating depend on the specific hose wall thickness — test-fit in your application first to confirm clearance and flex radius.
What size clamps do I need?
You'll need hose clamps for each end. The 3.00" end takes a clamp sized for that diameter, and the 2.75" end takes one for that size. Grab one of each before you start assembly.
Can I paint or color-match this hose?
Red silicone doesn't accept paint adhesion well. If you need a different color, wrap it with heat-resistant tape or sleeve it — that's the reliable route. Painting silicone directly will chip and flake.
Products are direct shipped from Supplier.