2.50" Silicone Hose 3-Ply 45 Degree Black Red
- Direct Shipped
2.50" Silicone Hose 3-Ply 45 Degree Elbow — Black/Red
High-temp silicone construction handles coolant, vacuum, and boost lines with a 45-degree bend for tight engine bay routing. Three-ply reinforced design resists kinks and maintains flow under pressure. Pre-angled geometry eliminates the need for custom bending.
Key Features
- 3-Ply construction — Resists collapse and maintains structural integrity under vacuum and pressure cycles.
- Pre-angled 45-degree elbow — Eliminates fabrication time and reduces risk of pinching or kinking at bends.
- Dual-color design — Black exterior with red inner walls for quick visual identification under the hood.
Specs
- Diameter: 2.50"
- Configuration: 45-degree elbow
- Material: Silicone
- Plies: 3-ply reinforced
- Color: Black exterior / Red interior
Whats Included
- One 2.50" silicone hose elbow (45 degree)
Frequently Asked Questions
Can I use this for coolant, vacuum, and boost lines?
Yes. Silicone handles all three—coolant flow, vacuum pull, and positive boost pressure. Choose clamp size to match your hose diameter and tighten firmly to prevent weeping at the connection.
Do I need hose clamps?
Hose clamps are not included. You'll need two stainless steel clamps sized for 2.50" hose (typically 2.5" to 3.5" range clamp size). Worm-drive or band clamps both work.
Will this hose kink if I don't support it?
The 3-ply reinforcement resists collapsing, but avoid sharp bends beyond the pre-angled 45 degrees. Support long runs with zip ties to brackets or existing lines to prevent stress at fittings.
Products are direct shipped from Supplier.