2.25" to 2.50" 90 Degree Silicone Reducer Hose 3-Ply Red
- Direct Shipped
2.25" to 2.50" 90 Degree Silicone Reducer Hose — 3-Ply Red
Stepped silicone hose that bridges two different diameter pipes at a 90-degree angle. 3-ply construction handles boost, coolant, and vacuum lines without compromise. Red finish matches custom builds or factory appearance depending on your setup.
Key Features
- Stepped diameter - Connects 2.25" to 2.50" without reducers or adapters
- 90-degree bend - Directs flow where hard pipe won't fit
- 3-ply silicone - Resists heat, oil, coolant, and vacuum cycles
Specs
- Material: Silicone
- Configuration: 90-degree elbow, stepped reducer
- Inlet diameter: 2.25"
- Outlet diameter: 2.50"
- Ply count: 3-ply
- Color: Red
- Quantity: 1 piece
Whats Included
- 1x 2.25" to 2.50" 90-degree silicone reducer hose
Frequently Asked Questions
Will this hose work with factory clamp size?
Measure your existing clamps before ordering. Standard hose clamps fit 2.25" and 2.50" diameters, but band width and clamp range vary by brand — verify your clamps span both ends of this stepped hose.
Can I use this for a turbo boost line?
Yes. 3-ply silicone handles boost pressure and heat. Confirm your clamps are rated for your system's PSI and route the hose away from sharp edges or moving parts.
Does this come with hose clamps?
No clamps included. You'll need two clamps — one for the 2.25" end and one for the 2.50" end — sized to fit your application's pressure and hose diameter range.
Products are direct shipped from Supplier.