2.00" x 12" Black Silicone Hose - 3-Ply Construction
- Direct Shipped
2.00" x 12" Black Silicone Hose — 3-Ply Construction
High-temp silicone hose rated for coolant, vacuum, and boost lines on serious builds. The 3-ply construction handles pressure cycles without degrading, and the 2-inch diameter fits common turbo and intercooler applications. Black finish matches most engine bay setups.
Key Features
- 3-Ply Silicone Core - Resists oil, coolant, and fuel without cracking or swelling.
- 2.00" ID Diameter - Direct swap or custom plumbing for turbo applications and intercooler piping.
- 12" Straight Section - Pre-cut length eliminates measuring; use as-is or cut to fit your routing.
Specs
- Material: Silicone
- Internal Diameter: 2.00"
- Length: 12"
- Construction: 3-Ply
- Color: Black
What's Included
- 1x 2.00" x 12" Black Silicone Hose
Frequently Asked Questions
Will this hose work for both coolant and boost lines?
Yes. The 3-ply silicone core handles coolant temps, vacuum draw, and moderate boost pressure. For high-boost setups pushing over 20 psi sustained, confirm your system pressure against silicone's rated limits.
Do I need clamps, and what size?
Clamps are not included. You'll need hose clamps sized for 2.00" OD — typically 2-1/4" or 2-1/2" worm-drive or band clamps, depending on your fitting design.
Can I cut this hose to a shorter length?
Absolutely. Use a sharp utility knife or hose cutter for a clean edge. After cutting, let the exposed end sit for a few minutes before installing to avoid silicone dust in your coolant or intake.
Products are direct shipped from Supplier.