1.25" to 1.50" 90 Degree Silicone Reducer Hose 3-Ply Black/Red
- Direct Shipped
1.25" to 1.50" 90 Degree Silicone Reducer Hose — 3-Ply Black/Red
Step down your coolant or intake diameter with a reinforced 90-degree elbow that handles heat and pressure. Three-ply silicone construction withstands engine bay temperatures while the angled design solves tight-fit plumbing problems. Reducer fitting bridges mismatched hose sizes in a single, reliable connection.
Key Features
- 3-Ply construction - Extra reinforcement resists bursting under pressure and repeated thermal cycling
- 90-degree angle - Navigates tight engine bay routing without kinking or restricting flow
- 1.25" to 1.50" reduction - Connects larger diameter hose to smaller fittings cleanly
Specs
- Material: Silicone
- Configuration: 90 Degree Elbow Reducer
- Size Range: 1.25" to 1.50"
- Ply Rating: 3-Ply
- Color: Black with Red Stripe
- Condition: New
- Quantity: 1 Piece
What's Included
- 1x Silicone Reducer Hose (90 degree, 3-ply)
Frequently Asked Questions
Will this hose work with coolant, vacuum, and intake applications?
Silicone handles coolant and intake temps without issue. For vacuum-only applications, confirm your system's vacuum rating first—most aftermarket vacuum lines run this material fine, but older carburetor vacuum systems sometimes need specific durometer ratings.
Do I need clamps, and what size?
You'll need hose clamps on both ends to secure this reducer to your existing hose or fittings. Clamps are not included—grab worm-gear clamps sized to fit 1.25" and 1.50" hose diameters.
Can I use this as-is, or does it need prep?
Comes ready to install. No painting, priming, or treatment needed. Just dry-fit it first to confirm your routing works, then clamp it down securely.
Products are direct shipped from Supplier.