activations · Blog · coding · faqs ·

Other Coding/Activation FAQs

Q. Why is OBDEleven Pro required for ALL(Excluding HK Improvement) of the MK8 VW/Audi 8Y coding/activations?

A. This is due to a 2-Factor Security Protection feature that was implemented into the new MK8 VWs and Audi 8Ys. This is called SFD Protection. Until recently I was able to do this remotely, however due to some recent changes, I am unable to using this DoIP cable setup that is sent out. A VAS 6154A cable could be sent to everyone however that would require them to be returned after use and they are expensive requiring a hefty rental fee. This would also cause issues if your vehicle is Tuned as it would require me to go Online with VW and would potentially flag the vehicle with a TD1 voiding the Engine/Powertrain Warranty. I am trying to avoid this. So for the benefit of the customer, ourselves, and cost, the OBDEleven with the DoIP cable setup is the best middle ground.
Audis (Exlcuding 8Y Audis due to being MQBevo) Prior to 2024 are Excluded from this as they do not have the SFD Protection.
Audis (Exlcuding 8Y Audis due to being MQBevo) 2024 or Newer MUST Contact me prior with VIN to purchasing as they have an even newer Security Protection measure in place called UNECE Cyber Security Protection for Connected Vehicles aka SFD-2 and this is a new system that REQUIRES online unlocking. More on this can be found Here.

 Q. Will Tuning the vehicle after these changes are made wipe them?

A. No, the ECU/TCU are different modules in the vehicle and will not impact any of the coding/activation changes made. If for some reason after tuning it does, please let us know ASAP and everything will be restored.

Q. Can the Dealer remove any coding or changes made?

A. Absolutely, the dealer can remove and reset the vehicle fully if they so please. It does not tend to happen regularly, however there have been some instances. If a dealership visit is required at any point after changes made there is an option on the site to have a full backup of the vehicle taken for use with a One-Click Restore done once the vehicle has returned from the dealership visit. This can be found here: Full Vehicle Backup Service

Q. What happens if I have something coded or changed and the dealer resets it?

A. In the event that this happens (and a full backup was not done), please reach out to acmtechnikllc@gmail.com and the coding or changes can be restored. 

Q. How often have issues been encountered after any activations or other coding changes?

A. Very rarely. However, there have been some out of the ordinary occurrences where something has caused a problem. In the event this does happen, please contact immediately and things will be remedied ASAP.

Q. Does an Infotainment Software Update remove this after activated?

A. If the update is performed yourself, no it will not. However, if the vehicle is taken to the dealership to have the update performed, there may be a chance of the coding changes being reverted. If that happens, contact me and the coding can be restored.

Q. Okay, you got me. Where can I purchase?

A. All coding changes and activations can be found here: Coding Services

Q. Okay, I've purchased. Whats required and what do I do next?

A. Awesome! You are one step closer to a better In-Vehicle experience! A DoIP cable setup will be drop shipped to you from Amazon. The only thing you will need is a laptop (Mac/Windows/Linux) with internet access. You will need to download a program called FlexiHub and install it. That can be found Here. Once installed and cable arrives, you will come here and use the Scheduler to schedule a time and date for the activation. At the time of activation, you will go out to your vehicle. Connect the cable setup to the vehicle. Open the hood. Turn the Ignition On but not the Engine. You will open the laptop and open FlexiHub. I will send you a token code that you will use to log in. At this point I will give you a call and we will get the process started!

 

Hopefully this helps answer some of the questions asked regarding any activation or other coding changes. Any further questions, please feel free to contact: acmtechnikllc@gmail.com

Back to FAQs